How To Connect Renpho Tape Measure

RENPHO Smart Torso Tape Measure two
User Manual

Thank you for choosing the RENPHO Smart Body Record Mensurate 2! This Bluetooth torso record measure is your personal wellness assistant It volition help y'all easily measure various body parts so you lot tin keep runway of your wellness and fettle. We hope that y'all enjoy using information technology!

Of import Condom Instructions

DO NOT employ this device for whatever purpose other than outlined in this manual.
Practise NOT disassemble or modify the device. There are no user-serviceable parts inside.
Exercise Non subject the device to farthermost weather condition: extreme temperatures beyond operating temperatures, high vibrations, dusty areas, boiling conditions (including any liquid) or direct sunlight.
Practise NOT use excessive strength on the record or the gear. Excessively pulling the record or grinding the gear may cause permanent harm to the device.
DO NOT fold or twist the tape every bit this may cause permanent damage.
Practise Non use excessive strength to pull the record beyond the maximum length of 150cm/60inch. This may permanently harm the device.
Be very careful when measuring cervix circumference. The tape may accidentally crusade choking.
Children nether ten years old must exist supervised by an adult when using the tar*.

Specifications

Product Name: Smart Tape
Model: R-Y001
Unit: cm/in
Size: 70mm 10 70mm x 26mm
Measuring Range: 150cm/60in
Resolution: 1mm, 1/t6In
Accuracy: t3mm, 23/32in
Working Temperature: 32W – 122°F
Working Humidity: 485%
Battery: 3V CR2032 Stand-by
Current: 1pA Working
Current: 2mA

What'southward in the Box

1 x RENPHO Smart Body Record Measure ii
1 x CR2032 Bombardment
1 x User Manual

Product Diagram

Buttons

: Press to power on. Press and hold to power off.
: Press to switch the unit between inches and centimeters.
: Printing to confirm and send the measurement to the app via Bluetooth. Press and concur to reset the information.

Install the Battery

Use your thumb to twist the battery cover slot open.
Insert the battery and ensure the positive pole is facing up.
Place the bombardment comprehend over the opening, and rotate counterclockwise to lock it.

Getting Started

https://qrco.de/bcTpOZ

Scan the QR code or search "Renpho Health" in the Apple App Shop or Google Play Store.
Short press the power button to turn the tape on. The Bluetooth is not continued if the Bluetooth icon continuously flashes.

Turn on Bluetooth and open the "Renpho Wellness" app.
Plow on the tape using the power push button and tap "Pair" on the app to connect the record with the app.
The Bluetooth icon will be solid once the connection is successful.

Measuring & Salve

Press the detach button to release the tape, and wrap it around the body office to exist measured.
Insert the locking pin into the record receptacle, and press until a "click" sound is heard.
Printing and hold the retract button until the tape has fully tightened around the body role to be measured.
The measurement data will be displayed on the screen. Press the unit button to alternating between units.

Click the body part name(eastward.thousand. Thigh) to sync data on the app.
Cull the date.
Presson the tape or click on the app to complete the measurement.
Click "Save' to continue a record of the data.
Press the detach button to unlock the tape and press the retract push to reel in the record.

Note:

DO Not allow the tape to retract besides fast as small-scale injury may occur otherwise.
DO Non utilise excessive forcefulness to pull the tape (over 1 m/39.4 inch per second) as this may cause inaccurate readings.

Troubleshooting Guide

Problems	Causes	Solutions
Ambiguous or no display	No battery or incorrect installation of battery	Reinstall or supersede the battery
A sudden alter of display when the tape hasn't been released	Brought by strong vibration or violent shaking	Reset the display earlier releasing the tape for measuring
Unusual number flashing or stuck brandish	Internal malfunction	Remove the bombardment and reinstall again

FCC Regulatory Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (i) This device may not cause harmful interference, and (two) this device must accept any interference received, including interference that may cause undesired performance. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Course B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Even so, in that location is no guarantee that interference volition not occur in a detail installation. If this equipment does crusade harmful interference to radio or television set reception, which can exist determined past turning the equipment off and on, the user is encouraged to try to correct the interference past 1 or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit unlike from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for aid.

RF Exposure Compliance This equipment complies with FCC radiation exposure limits gear up forth for an uncontrolled environs. This transmitter must not be co-located or operating in conjunction with whatsoever other antenna or transmitter. ISED Regulatory compliance This device contains license-exempt transmitters that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the post-obit ii conditions: (one)This device may non cause interference. (ii)This device must have any interference, including interference that may cause undesired functioning of the device.
This equipment complies with IC RSS-102 radiation exposure limits set up along for an uncontrolled surround.

Warranty Policy

Your RENPHO product purchase is covered past a one-yr limited manufacturer warranty from the date of delivery. For warranty terms and conditions, delight visit: https://renpho.com/pages/warranty-terms-and-atmospheric condition
Note: Product registration is not required for the warranty. If y'all choose non to annals your production, information technology volition non diminish the production warranty.

Customer Service

Please feel gratis to contact usa if you lot take any questions or concerns. RENPHO Customer Service Team guarantees a quick response and hassle-free solutions to any effect you lot may have within business hours.

TEL: +1(844) 417 0149 (U.s.a. Just) Monday-Friday 9:00 AM-iv:30 PM 1800 MY RENPHO (1800 69 7367) (AU Simply) Monday-Fri 9:OOAM-vi:OOPM (AEST)
Email: [email protected] (US&CA)
[email protected] (AU)
*For lacking products or the return of items, please contact us with your order number within the specified warranty period.
Exercise NOT dispose of any product parts as they may be required for inspection/repair.
U.s.a. Importer: JOICOM CORPORATION 14129 The Merge Street,
Building 3 Unit A, Eastvale, CA 92880
Manufacturer: Shenzhen Ruiyi Concern Engineering Co., Ltd.
Qianhai Circuitous A201,
Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, P.R.China
Made in China NA1